The unit

The unobtrusive, timeless design of the Bioheatplus unit is not only beautiful, but also fully and completely adapted to technology so the highest possible level of efficiency can be achieved. The infrared heating elements are arranged in a matte silver stainless steel housing. The heating elements made from high-density ceramic are practically indestructible.

The intersecting waves make all the difference

The infrared waves are reflected in the unit due to the special shape of the housing and the arrangement of the infrared ceramic elements. The effect: The rays collide, interference occurs and the amplified intersecting-wave infrared radiation arises from the directed infrared rays. The benefit: The intersecting-wave infrared radiation has a much higher energy level than conventional infrared radiation and also spreads widely in all directions. The front panels are also heated by the infrared radiation and ensure the uniform distribution of heat.

A special benefit: The uniform heating of all areas of the room makes unpleasant convection (air circulation) heating a thing of the past. An even climate is created in the room. This is a benefit especially for people with dust allergies and asthma who have problems in the winter because of the constant circulation of dust.

The thermostat

The room temperature is adjusted with a wireless thermostat. Please be aware that when using the Bioheatplus unit, the felt temperature is 2-4 degrees Celsius above the actual room temperature. So the thermostat should accordingly be set lower (additional energy savings).

Bioheatplus takes care of everything else via its intelligent operation.

Technical data

• Pyramid-shaped triangular wall unit
• Stainless steel housing
• 3 infrared heating elements
• Control for timer and cycle
• Overheating protection
• Porcelain cable clamps
• Technology patented in Germany
• Made in Germany
• 2 years warranty
• Right of return within the warranty period only with demonstrably defective device.

Voltage 230 volts
Current max. 5,2 amps
Power max. 1.300 watts
Consumption / hour approx 350 Watt
Safety class I
Dimensions (WxHxD) 51 x 18 x 16 cm
Weight 4,8 kg
(Deutsch) Montage (Deutsch) Wand-, Wandeinbau- oder Deckenmontage
(Deutsch) Elektromagnetische Verträglichkeit (Deutsch) Elektrosmogarm
(Deutsch) Zertifikate (Deutsch) TÜV GS-geprüft
Included in delivery

• Bioheatplus
• Wall mount
• Room thermostat (wireless)
• Wireless switch
• Installation and operating instructions
• EC conformity declaration

Certified according to

EN 60335-1:2012+A11
EN 60335-2-30:2009+A11
AfPS GS 2014:01 Par. 3.1

Zertifikat Nummer: S 60108190